Implementing Guest Hotspot access with passcode

In this video below we will create a guest SSID in dashboard and then in ISE configure the Hotspot portal with Passcode.


Cisco ISE & Meraki How-To Videos

Over the past few months I have been recording videos for internal training. I have decided I would rather make them publicly available as hopefully they will benefit the greater networking community as well. They are rough around the edges. I did not spare any time trying to clean them up unless I completely messed up during recording. Keep that in mind and I hope you enjoy! I will be posting links to the videos as I upload. If you have any questions or have noticed I messed something up please comment in my posts! Thanks for reading!

  1. General ISE UI Walkthrough
  2. Network Devices and Groups
  3. Authentication and Authorization Overview
  4. Wireless 802 1x Configuration with Internal Users in ISE
  5. Implementing Guest Hotspot access with passcode
  6. Active Directory Integration into ISE
  7. Cisco ISE Local Admin Password Reset
  8. Cisco ISE Custom Certificate Installation
  9. WPA2-Enterprise with Active Directory and PEAP-EAP-MSCHAPv2
  10. WPA2-Enterprise with Active Directory and PEAP-EAP-TLS
  11. ISE Policy Sets
  12. BYOD with Device Registration and Native Supplicant Provisioning
  13. Single SSID BYOD Onboarding


  1. New 2.3+ UI Changes Walkthrough
  2. Wired Dot1x Authentication with EAP-MSCHAPv2 Part 1
  3. Wired Dot1x Authentication with EAP-MSCHAPv2 Part 2
  4. Wired Dot1x Authentication with EAP-TLS
  5. Wired Dot1x Monitor-Mode for Meraki MS
  6. Wired Dot1x Fail-Open Configuration for Meraki MS
  7. Wired Guest Hotspot Portal
  8. Dynamic VLAN Assignment with CoA and MS ACLs
  9. Wired MDA Authentication with Phones and PCs
  10. BYOD Device Registration with Wired Supplicant Provisioning
  11. VPN Authentication with MX

Here is the Video Playlist: